Yayın tarihi için Malzeme Bilimi ve Mühendisliği Bölümü listeleme
Toplam kayıt 444, listelenen: 1-20
-
Sintering behaviour of precursor mullite powders and resultant microstructures
(Elsevier BV, 1996)Crystallization and sintering behaviour of two structurally different diphasic precursor mullite powders were studied. Powder derived from boehmite and colloidal silica formed mullite at around 1250°C and could be sintered ... -
? › ß reverse phase transformation in silicon carbide in silicon nitride-particulate-reinforced-silicon carbide composites
(American Ceramic Society, 1996)The ? › ß reverse transformation in SiC is observed in Si3N4-particulate-reinforced-SiC composites made from as-received ?-SiC and ?-Si3N4 powders. However, the transformation does not occur to any great extent in composites ... -
Reaction-bonded aluminium oxide (RBAO) process: II, the solid-state oxidation of RBAO compacts
(2000)The oxidation kinetics and the fraction of aluminum that is oxidized via solid-gas reaction in reaction-bonded aluminum oxide (RBAO) compacts are shown to be strongly dependent on the oxidation temperature and the ... -
Modeling anisotropic single crystal growth kinetics in liquid phase sintered ?-Al2O3
(Kluwer Academic Publishers, Dordrecht, Netherlands, 2000)Single crystals of ?-alumina with {0001}, {11¯20} and {01¯12} orientations were embedded in a matrix of liquid phase sintered alumina to study ?-alumina single crystal growth in the presence of a calcium aluminosilicate ... -
Mechanical properties of magnesia-spinel composites
(2002)A set of dense magnesia-magnesium aluminate spinel composites has been prepared by hot-pressing magnesia powder using 0 to 30 wt.% of spinel powder of mean particle size 3, 11 and 22 µm. Bend stength, modulus, and fracture ... -
Computational analysis on cymbal transducer
(Taylor & Francis Inc, 2003)Finite Element Analysis in collaboration with experimental studies was conducted to investigate the effects of dimensional parameters on the performance of the cymbal transducer. ANSYS 5.5 FEM code was used for computational ... -
The microstructural features of an alumina-mullite-zirconia refractory material corroded by molten glass
(Elsevier Sci LTD, 2003)An alumina-mullite-zirconia refractory penetrated by a standard soda-lime-silica glass was statically tested at 1370 degreesC for 72 h. Microstructural features and EDAX analysis of the compositions in the corroded region ... -
Young's modulus measurements of magnesia-spinel composites using load-deflection curves, sonic modulus, strain gauges and Rayleigh waves
(Elsevier Sci LTD, 2003)The extent of interlinking of the microcracking and a decrease in strength and modulus values were determined to be a function of both spinel particle size and volume fraction to allow calculation of thermal shock parameter, ... -
Quantitative X-ray diffraction analysis of reactive infiltrated boron carbide-aluminium composites
(Elsevier Sci LTD, 2003)Dense (> 98% of theoretical) boron carbide, (B4C)-aluminium (Al) composites were produced between 985 and 1370 degreesC by pressureless melt infiltration of Al alloys into porous B4C compacts under. argon (Ar) atmosphere. ... -
Mechanical properties and thermal shock behaviour of alumina-mullite-zirconia and alumina-mullite refractory materials by slip casting
(Elsevier Sci LTD, 2003)Strength and modulus values of slip-cast alumina-mullite-zirconia and alumina-mullite refractories have been determined as a function of quench temperature by air and water quenching. The resistance to fracture initiation ... -
The Microstructural Studies in Limonite Containing Satin and Opaque Wall Tile Glazes
(2003)There have been a number of studies to investigate possible use of limonite and limonite-based pigments in different ceramic glaze systems. In these researches it was reported that Eskisehir Mihaliccik region's limonite ... -
Interactions between a leadless glaze and a biscuit fired bone China body during glost firing - part III: effect of glassy matrix phase
(Elsevier Sci LTD, 2003)As the final part of the study, the interactions between a commercial leadless glaze and a simulated bone china body glass during glost firing at different temperatures have been investigated. Advanced techniques such as ... -
The effect of mullite on the mechanical properties and thermal shock behaviour of alumina-mullite refractory materials
(Elsevier Sci LTD, 2003)Mechanical properties and thermal shock behaviour of slip-cast alumina-mullite refractories have been investigated. There was a marked improvement in strength, Young's modulus and fracture toughness values with the addition ... -
The influence of zircon in a model aluminosilicate glass tank forehearth refractory
(Elsevier Sci LTD, 2003)Standard aluminosilicate forehearth refractories are normally fabricated with a small proportion of zircon to improve their performance. To identify possible bases for the action of the zircon, fine-grain aluminosilicate ... -
Production and characterisation of iron-chromium pigments and their interactions with transparent glazes
(Elsevier Sci LTD, 2003)In this study, production and characterisation of pigments by using less expensive raw materials such as limonite and chromite was undertaken. The resulting pigments were characterised by using X-ray diffraction (XRD) and ... -
Effect of the particle size distribution of spinel on the mechanical properties and thermal shock performance of MgO-spinel composites
(Elsevier Sci LTD, 2003)The influence of varying the amounts of spinel with a similar median particle size, but with different distribution, on the mechanical properties and thermal shock performance of MgO-spinel composites was investigated. ... -
Preparation of cordierite ceramics from talc with boron oxide addition
(2004)Thermal reactions of impure materials of talc, silica and alumina with moderate particle sizes were investigated to obtain a dense cordierite ceramic by boron oxide addition as a sintering aid. Mixed powders were uniaxially ... -
Application of syenite as a raw material and its effects on the physical characteristics of the ceramic structure of floor tile
(Trans Tech Publications LTD, 2004)Syenite has been used as a fluxing agent in floor tile ceramic compositions. The raw material of syenite has an important role to the regulation of furnace performances, due to its lowering of the melting point and its ... -
Electrophoretic deposition of ZnO thin film in aqueous media
(Springer, 2004)In thin films, controlled porous structures are desired for certain ceramic gas sensors. The aim of this study was to fabricate ZnO coated substrates starting with aqueous suspensions with electrophoretic deposition ... -
Production of alpha-beta SiAlON-TiN/TiCN composites by gas pressure sintering
(Belgian Ceramic Society, 2004)Due to the favorable properties possessed by novel alpha-beta SiAlONs, they are attractive materials for cutting tool applications. Such applications require materials with high hardness, high fracture toughness and high ...