Kurum Yazarı "Mandal, Hasan" Malzeme Bilimi ve Mühendisliği Bölümü İçin Listeleme
-
A comparative study of SiAlON ceramics
Mallik, Awadesh Kumar; Acikbas, Nurcan Çalış; Kara, Ferhat; Mandal, Hasan; Basu, Debabrata (Elsevier Sci LTD, 2012)Two different varieties of Si3N4 powders were used to prepare SiAlON ceramics. 100% beta-Si3N4 was used from refractory grade powders (B1) and another purer 98% alpha-Si3N4 (50A) powder was used to prepare the SiAlON ... -
Cytocompatibility property evaluation of gas pressure sintered SiAlON-SiC composites with L929 fibroblast cells and Saos-2 osteoblast-like cells
Kumar, Alok; Mallik, Awadesh Kumar; Açıkbaş, Nurcan Çalış; Yaygingol, Merve; Kara, Ferhat; Mandal, Hasan; Basu, Bikramjit (Elsevier Science BV, 2012)Although the oxide ceramics have widely been investigated for their biocompatibility, non-oxide ceramics, such as SiAlON and SiC are yet to be explored in detail. Lack of understanding of the biocompatibility restricts the ... -
Decolouration effect of WC addition on gas pressure sintered alpha-beta SiAlON ceramics
Ayas, Erhan; Kara, Alpagut; Mandal, Hasan; Turan, Servet; Kara, Ferhat (Elsevier Science BV, 2004)In this study, an attempt was made to mask an inhomogeneous gray colouration featured on the surfaces of the gas pressure sintered alpha-beta SiAlON ceramics containing 50% alpha and 50% beta SiAlONs in the form of spots. ... -
Development of ?-ß SiAlON ceramics from different Si 3N4 starting powders
Açıkbaş, N. Çalış; Kara, Ferhat; Mandal, Hasan (2009)?-ß SiAlON ceramics were produced from different starting Si3N4 powders including P-Si3N4 and ?-Si3N4 powders and mixtures of these powders. Gas pressure sintering was used for sintering. After sintering, resultant fracture ... -
Development of alpha-beta SiAlON ceramics from different Si3N4 starting powders
Açıkbaş, N. Çalış; Kara, Ferhat; Mandal, Hasan (Trans Tech Publications LTD, 2009)alpha-beta SiAlON ceramics were produced from different starting Si3N4 powders including beta-Si3N4 and alpha-Si3N4 powders and mixtures of these powders. Gas pressure sintering was used for sintering. After sintering, ... -
Development of laminar type functionally graded SiAlON ceramics
Çalış, N; Kara, Alpagut; Kara, Ferhat; Mandal, Hasan (Trans Tech Publications LTD, 2004)In order to combine high hardness with high toughness, laminar type (two layers) functionally graded (FGM) SiAlON ceramics were developed. In a previous study achieved by the same authors, presence of a sharp transition ... -
Development strategies for sialon ceramics
SiAlON ceramics have a wide range of applications due to their favorable mechanical and thermal properties. They are one of the main groups of materials being considered for high temperature load bearing applications and ... -
Effect of different nucleation temperatures on the microstructural development of ?-SiAlON ceramics
Kuşhan, Seniz Reyhan; Mandal, Hasan (2004)?-SiAlON ceramics with elongated grains were previously observed in different studies. Sintering conditions are known to have a significant role on the microstructural development. By the nucleation treatment application ... -
Effect of different nucleation temperatures on the microstructural development of alpha-SiAlON ceramics
Kuşhan, Seniz Reyhan; Mandal, Hasan (Trans Tech Publications LTD, 2004)alpha-SiAlON ceramics with elongated grains were previously observed in different studies. Sintering conditions are known to have a significant role on the microstructural development. By the nucleation treatment application ... -
Effect of SiC addition on the thermal diffusivity of SiAlON ceramics
Akın, Seniz Reyhan Kushan; Turan, Servet; Gençoğlu, Pervin; Mandal, Hasan (Elsevier Sci LTD, 2017)Despite the fact that thermal conductivity is a crucial parameter for SiAlON ceramics with respect to their suitability in various applications, including high-temperature structural components, wear parts, and cutting ... -
Effect of sintering conditions and heat treatment on the properties, microstructure and machining performance of alpha-beta-SiAlON ceramics
Açıkbaş, N. Çalış; Yurdakul, Hilmi; Mandal, Hasan; Kara, Ferhat; Turan, Servet.; Kara, Alpagut; Bitterlich, B. (Elsevier Sci LTD, 2012)The properties of SiAlON ceramics are strongly affected by the composition and structure of the intergranular phase, which are controlled by dopants, sintering conditions and starting silicon nitride (Si3N4) powder ... -
Experimental and finite element study of the thermal conductivity of alpha-SiAlON ceramics
Kuşhan, Seniz Reyhan; Uzun, İbrahim; Doğan, Battal; Mandal, Hasan (Blackwell Publishing, 2007)The thermal conductivity of monolithic Y-Sm/alpha-SiAlON was evaluated using experimental data and finite element analysis. The thermal diffusivities of Y, Y-Dy, and Y-Ce/alpha-SiAlON ceramics were also investigated ... -
Fabrication of functionally graded SiAlON ceramics by tape casting
Açıkbaş, N. Çalış; Suvacı, Ender; Mandal, Hasan (Blackwell Publishing, 2006)Functionally graded SiAlON ceramics (FG-SiAlONs) were successfully prepared by the tape casting and lamination approach. Non-aqueous SiAlON slurries with five different alpha to beta-SiAlON ratios (85 alpha:15 beta, 70 ... -
Formation of ?-SiAlON ceramics containing scandium
Kurama, Semra; Mandal, Hasan (2004)?-SiAlON is able to accommodate cations into its crystal structure if the cations are sufficiently small in size, thus helping to reduce the volume of the remnant grain boundary phase after processing. Lutetium with an ... -
Formation of alpha-SiAlON ceramics containing scandium
Kurama, Semra; Mandal, Hasan (Trans Tech Publications LTD, 2004)alpha-SiAlON is able to accommodate cations into its crystal structure if the cations are sufficiently small in size, thus helping to reduce the volume of the remnant grain boundary phase after processing. Lutetium with ... -
Functionally graded SiAlON ceramics
Çalış, N; Kuşhan, Seniz Reyhan; Kara, Ferhat; Mandal, Hasan (Elsevier Sci LTD, 2004)Functionally graded SiAlON ceramics were developed by three different methods to improve the mechanical properties of SiAlONs; powder bed, rapid cooling and laminating. beta-SiAlON compacts were embedded in two different ... -
Influence of beta-Si3N4 particle size and heat treatment on microstructural evolution of alpha:beta-SiAlON ceramics
Açıkbaş, N. Çalış; Kumar, R.; Kara, Ferhat; Mandal, Hasan; Basu, B. (Elsevier Sci LTD, 2011)In the present study, we report the effects of starting beta-Si3N4 particle sizes and post-sintering heat treatment on microstructure evolution and mechanical properties of prepared alpha-beta SiAlON ceramics. Three different ... -
Influence of SiC addition on tribological properties of SiAlON
Mallik, Awadesh Kumar; Reddy, K. Madhav; Açıkbaş, Nurcan Çalış; Kara, Ferhat; Mandal, Hasan; Basu, Debabrata; Basu, Bikramjit (Elsevier Sci LTD, 2011)The tribological properties of gas pressure sintered SiAlON and its composite with 18 wt% silicon carbide (SiC) against two different mating materials, i.e., alumina and SiAlON are evaluated. SiAlON and SiAlON-18%SiC ... -
Influence of type of cations on intergranular phase crystallisation of SiAlON ceramics
Açıkbaş, N. Çalış; Kara, Alpagut; Turan, Servet; Kara, Ferhat; Mandal, Hasan; Bitterlich, B. (Trans Tech Publications LTD, 2007)25 alpha:75 beta SiAION composition was designed with different cations and at different molar ratios. Effect of the type of cations both on the composition and the type of intergranular phase investigated after gas pressure ... -
Interactions Between AlN and SiAlON Ceramics
Kalemtaş, Ayşe; Acikbas, N. Çalış; Kara, Ferhat; Mandal, Hasan; Krnel, K.; Kosmac, T. (Trans Tech Publications LTD, 2009)In the present study, interactions between AlN and SiAlON laminated couples were investigated after gas pressure (GPS) and spark plasma sintering (SPS) by scanning electron microscopy (SEM) and energy dispersive x-ray ...