Ara
Toplam kayıt 184, listelenen: 31-40
Effects of the red mud based pigment addition on the physical and micro-structural properties of porcelain tiles
(Trans Tech Publications LTD, 2004)
In the production of conventional porcelain tiles colouring agents, being either in the form of pure oxides or pigments, are commonly and widely used at considerably high amounts to increase the attraction impact of final ...
Applications of calcium phosphate based antibacterial ceramics on sanitary and tile wares
(Trans Tech Publications LTD, 2004)
In this study, metal cation consisting calcium phosphate based antibacterial ceramic powders were synthesized with wet chemical technique. The developed antibacterial powder was added to the glaze composition of the ceramic ...
FMR study of ultrahigh vacuum e-beam evaporated Co 23Cu 77 nanogranular films: Magnetotransport properties
(2006)
The magnetic, magnetotransport and structural properties of Co 23Cu 77 granular thin films (7-43 nm) have been investigated using ferromagnetic resonance (FMR) and high-resolution XRD techniques. Co particles possess a ...
Use of rhyolite as flux in porcelain tile production
(Techna Srl, 2009)
The use of rhyolite from a local source as an alternative fluxing agent in a commercial porcelain stoneware formulation was investigated. The experimental work was achieved in two parts: in the first part, standard tests ...
Investigation of sanitaryware scrap behaviour in terracotta bodies
(Trans Tech Publications LTD, 2004)
In this paper, an investigation into a potential use of unfired body scrap from a local sanitaryware manufacturer in commercial terracotta production was presented. Experiments were achieved under laboratory conditions by ...
Electrophoretic deposition of ZnO
(Trans Tech Publications LTD, 2004)
Electrophoretic phonemenon is applied in different parts of science. Electrophoretic Deposition (EPD) is effective, fast and controllable process for obtaining various thin or thick film layers. In this study application ...
Young's modulus measurements of magnesia-spinel composites using load-deflection curves, sonic modulus, strain gauges and Rayleigh waves
(Elsevier Sci LTD, 2003)
The extent of interlinking of the microcracking and a decrease in strength and modulus values were determined to be a function of both spinel particle size and volume fraction to allow calculation of thermal shock parameter, ...
Quantitative X-ray diffraction analysis of reactive infiltrated boron carbide-aluminium composites
(Elsevier Sci LTD, 2003)
Dense (> 98% of theoretical) boron carbide, (B4C)-aluminium (Al) composites were produced between 985 and 1370 degreesC by pressureless melt infiltration of Al alloys into porous B4C compacts under. argon (Ar) atmosphere. ...
Production of blue willemite based pigments by using ZnO powder produced from metal slags
(Trans Tech Publications LTD, 2004)
In this study, production of pigments by adding different amount of Co and calcination at different temperatures were under-taken. Co-willemite blue pigments were produced by using ZnO powders produced from metal slags. ...
Optimization of ?-sialon microstructure by heat treatment
(2008)
Nd-doped ?-SiAlON starting composition (Nd0.33Si 9.38Al2.62O1.62N14.38) was prepared by gas pressure sintering at 1825°C for 3 hrs. In order to explore the effect of post heat treatment on the developments of elongated ...