Ara
Toplam kayıt 12, listelenen: 1-10
Structure, Microstructure and Magnetic Properties of CoxNi100-x Powders Synthesized by Hydrothermal Method
(Springer, 2017)
Pure NiCo nanoparticles with different compositions were synthesized by hydrothermal route at 100 degrees C during 2 h. From x-ray diffraction analysis, we have shown that the structure varies from face-centered cubic (FCC) ...
The role of viscosity on microstructure development and stain resistance in porcelain stoneware tiles
(Elsevier Sci LTD, 2010)
Effect of composition on viscosity of porcelain stoneware tiles and role of the viscosity on microstructure development and stain resistance in porcelain stoneware tiles were investigated. The viscosity of the tiles was ...
The usage of newly developed glass fibre in cement structure and their characterization
(Elsevier Sci LTD, 2018)
In this work, recently developed Zrnl glass fibres belonging to the SrO-Mn2O3-Fe2O3-MgO-ZrO2-SiO2 (SMFMZS) system have been used as reinforcing materials in cement. The highest (2.610 N/mm(2)) compressive strength value ...
An alternative composite approach to tailor the thermoelectric performance in SiAlON and SiC
(Elsevier Sci LTD, 2017)
The thermoelectric properties of SiAlON and SiC based composites prepared by adding TiCN (5 and 10 vol.%) as a particulate or as a segregated three-dimensional network were investigated. Although the volume fraction of the ...
Processing, phase evaluation and mechanical properties of MoSi2 doped 4TaC-HfC based UHTCs consolidated by spark plasma sintering
(Elsevier Sci LTD, 2016)
In this research, binary 4TaC-HfC based composites were consolidated using carbide materials and addition of 0-15 vol.% MoSi2 by means of spark plasma sintering at 2000 degrees C. The nearly full dense and monophase specimens ...
Pyroplastic deformation behavior of vitreous porcelain bodies in presence of spodumene
(Australian Ceramic Society, 2017)
Pyroplastic deformation tendency of vitreous body compositions is a major production problem. In this work, a vitreous sanitaryware body composition (ST) which was developed in a previous work was taken as standard, and ...
Effect of heat treatment on green machinability of SiAlON compacts
(Elsevier Science Sa, 2014)
SiAlON based ceramics are promising materials for wear applications such as wire extrusion dies, pipe bending rollers, etc. due to their outstanding mechanical properties both at high and low temperatures. To be able to ...
Effect of Thickness on the Structural, Microstructural, Electrical and Magnetic Properties of Ni Films Elaborated By Pulsed Electrodeposition on Si Substrate
(World Scientific Publ Co Pte LTD, 2018)
We have studied the effect of thickness on the structural, microstructural, electrical and magnetic properties of Ni films electrodeposited onto n-Si (100) substrates. A series of Ni films have been prepared for different ...
The effects of processing on the alpha <-> beta SiAlON transformation during cycling heat treatments
(Elsevier Science Sa, 2008)
Typical alpha/beta-SiAlON starting composition of formula Nd(0.33)Si(9.38)Al(2.62)O(1.62)N(14.38) was densified by two different sintering processes, hot pressing (HP) and gas pressure sintering (GPS), using Nd(2)O(3) as ...
An investigation of pottery production technology for the West Slope wares from Dorylaion (Eskisehir/Turkey)
(Soc Espanola Ceramica Vidrio, 2013)
Researches in the field of pottery production technology in ancient times, done in different settlements during the same period, may contribute to know relationships established within the different cultural communities. ...