Güncel Gönderiler: Makale Koleksiyonu
Toplam kayıt 71, listelenen: 21-40
-
alpha ->beta sialon transformation in calcium-containing alpha-SiAlON ceramics
(Elsevier Sci LTD, 1999)Recent studies on rare earth densified a-sialon ceramics have shown that the resulting alpha-sialon product, present either as a single phase or in conjunction with beta-sialon, is unstable when heat treated at lower ... -
New heat treatment methods for glass removal from silicon nitride and sialon ceramics
(Kluwer Academic Publ, 2000)Sialon ceramics were discovered simultaneously (but independently) in late 1971 at Newcastle University and also at the Toyota Research Laboratories in Japan. During the 30 years since their original discovery, the Newcastle ... -
Preparation of Ce and Nd beta-sialon ceramics by alpha ->beta sialon transformation
(Inst Materials, 1997)It has previously been accepted that lanthanum and cerium do not form alpha-sialon structures because their ions are too large to enter the interstices in the structure. Recent work on heat treatment of rare earth densified ... -
Boron nitride-silicon carbide interphase boundaries in silicon nitride-silicon carbide particulate composites
(Elsevier Sci LTD, 2002)Interphase boundaries between SiC and h-BN grains in hot isostatically pressed Si3N4-SiC particulate composites made from both as-received powders and deoxidised powders, in which sub-micron size h-BN particles occur as a ... -
The dependence of equilibrium film thickness on grain orientation at interphase boundaries in ceramic-ceramic composites
(Elsevier Science BV, 2000)High-resolution transmission electron microscope observations of hexagonal boron nitride - 3C silicon carbide interphase boundaries suggest that where one or more phases is highly anisotropic, an orientation dependence on ... -
High resolution transmission electron microscopy of grain boundaries between hexagonal boron nitride grains in Si3N4-SiC particulate composites
(Wiley-V C H Verlag GMBH, 2000)High resolution transmission electron microscope observations of grain boundaries in hexagonal boron nitride in which adjacent grains are rotated with respect to one another about either <2 (1) over bar (1) over bar 0> or ... -
Phase development of barium titanate from chemically modified-amorphous titanium (hydrous) oxide precursor
(Elsevier Sci LTD, 2002)A synthesis procedure for barium titanate involving a chemically modified titanium precursor has been developed. Using a titanium isopropoxide precursor modified with acetylacetone and barium acetate, coprecipitated gels ... -
Microstructural characterization of surface layers formed on a low alloy steel during erosion - oxidation in a fluidized bed
(Chapman Hall LTD, 1997)Low alloy steel specimens were subjected to erosion-oxidation in a simulated fluidized bed environ ment in the range 100-600 degrees C. Transmission electron microscopy was carried out on the surfaces which experienced ... -
Use of perlite in wall tile production
(Amer Ceramic Soc, 1999)Raw perlite was added to monoporous tile bodies in different proportions. Their mechanical, physical and thermal characteristics were compared to ones having no perlite. Adding perlite to wall tile bodies offers both weight ... -
Displacement amplification of electroactive materials using the cymbal flextensional transducer
(Elsevier Science Sa, 2001)High performance electroactive materials were studied as the driver element for the "cymbal" flextensional transducer. The compositions included were commercially available Navy Type I and PKT552 lead zirconate titanate ... -
Nanocomposite PLZT ceramic materials in comparison with other processing technique for photostrictive application
(Ceramic Soc Japan-Nippon Seramikkusu Kyokai, 2001)The performance of photostrictive materials can be enhanced by controlling the materials and microstructural characteristics through processing methods, ceramic composition and dopant type/content. In this paper the influence ... -
An ultrasonic motor using a metal-ceramic composite actuator generating torsional displacement
(Japan J Applied Physics, 1998)An ultrasonic motor composed of three components; a stator, a rotor and a ball bearing is proposed. The stator is made of an active piezoelectric ring, poled in the thickness direction and bonded with two windmill-like ... -
Effect of ceramic processing methods on photostrictive ceramics
(Kluwer Academic Publ, 1999)Lanthanum-modified lead zirconate titanate (PLZT) ceramics (3/52/48) doped with 0.5 at.% WO3 were prepared by three different processing methods, coprecipitation, sol-gel and conventional oxide mixing techniques, to ... -
Influence of sample thickness on the performance of photostrictive ceramics
(Amer Inst Physics, 1998)Ferroelectric materials with high photovoltaic properties are of interest for new optical devices such as photostrictive ceramic actuators. However, fabrication of these devices requires development of materials exhibiting ... -
Investigation of the phase composition and stability of the alpha-SiAlONs by the Rietveld method
(Elsevier Sci LTD, 2002)Different compositions of Y- and Nd-alpha-SiAlONs were sintered at 1825 degreesC and analysed by the XRD method. The Rietveld technique was used for characterisation of the diffraction pattern and the x value of alpha-SiAlON, ... -
Frequency-tunable microwave dielectric resonator
(IEEE-Inst Electrical Electronics Engineers Inc, 2001)A new type of tunable composite dielectric resonator (DR) has been designed. In the structure of this DR, a controllable insert was used to change the resonance frequency (f(0)) in a wide spectral range, while preserving ... -
Luminescence properties of terbium-, cerium-, or europium-doped alpha-sialon materials
(Academic Press Inc Elsevier Science, 2002)… -
The influence of zircon on the mechanical properties and thermal shock behaviour of slip-cast alumina-mullite refractories
(Elsevier Science BV, 2002)Mechanical properties of slip-cast alumina-mullite (AM) refractories were improved significantly by the addition of similar to 2-mu-m zircon (ZrSiO4) particles. Fracture behaviour showed mainly transgranular, with some ... -
Melting behaviour of glasses in the SrO-MgO-ZrO2-SiO2 system
(Soc Glass Technology, 1999)In the SrO-MgO-ZrO2-SiO2 system a large range of compositions with 60, 55, 50, 45, 40 and 35 wt% silica has been thoroughly investigated The effect of silica and other constituents on melting, annealing and colour variations ... -
Preparation of multiple-cation alpha-SiAlON ceramics containing lanthanum
(Amer Ceramic Soc, 1999)Until recently, it was accepted that Ce3+ cations, with an ionic radius (r) of 1.03 Angstrom, were too large to form an alpha-SiAlON structure. However, more-recent studies have shown that cerium cations can be incorporated ...
