| dc.contributor.author | Mandal, Hasan | |
| dc.contributor.author | Kara, Ferhat | |
| dc.contributor.author | Turan, Servet | |
| dc.contributor.author | Kara, Alpagut | |
| dc.date.accessioned | 2019-10-20T07:59:52Z | |
| dc.date.available | 2019-10-20T07:59:52Z | |
| dc.date.issued | 2001 | |
| dc.identifier.issn | 1013-9826 | |
| dc.identifier.uri | https://hdl.handle.net/11421/15800 | |
| dc.description | 7th Conference and Exhibition of the European Ceramic Society -- 9 September 2001 through 13 September 2001 -- Brugge -- 58742 | en_US |
| dc.description.abstract | New ?-ß SiAlON ceramics were produced, characterised and tested in turning operations of cast iron. Cutting speeds varied between 400-1200 m/min while feeding rates were between 0.3 to 0.5 mm/rev. The results were compared with some of commercially available ceramic inserts. It was proved that new ?-ß SiAlONs offer reduced tool wear and hence increased tool life for cast iron machining. | en_US |
| dc.language.iso | eng | en_US |
| dc.rights | info:eu-repo/semantics/closedAccess | en_US |
| dc.subject | Cutting Tool | en_US |
| dc.subject | Sialon | en_US |
| dc.subject | Turning Operations | en_US |
| dc.title | Performance of new ?-ß SiAlONs in turning operations | en_US |
| dc.type | conferenceObject | en_US |
| dc.relation.journal | Key Engineering Materials | en_US |
| dc.contributor.department | Anadolu Üniversitesi, Fen Bilimleri Enstitüsü, Seramik Mühendisliği Anabilim Dalı | en_US |
| dc.identifier.volume | 206-213 | en_US |
| dc.identifier.issue | II | en_US |
| dc.identifier.startpage | 929 | en_US |
| dc.identifier.endpage | 932 | en_US |
| dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US |
| dc.contributor.institutionauthor | Mandal, Hasan | |
| dc.contributor.institutionauthor | Kara, Ferhat | |
| dc.contributor.institutionauthor | Turan, Servet | |
| dc.contributor.institutionauthor | Kara, Alpagut | |
