Ara
Toplam kayıt 24, listelenen: 1-10
Effect of the Particle Size of Hard Raw Materials on Physical Properties of Sanitaryware Porcalain
(Gazi University, Fac Engineering Architecture, 2011)
Sanitaryware porcelain is a kind of a group of glassy porcelains called "vitreous china". The raw materials quartz sand and feldispar used for production of these porcelains are hard materials. It is well known that particle ...
Preparation of cordierite ceramics from talc with boron oxide addition
(2004)
Thermal reactions of impure materials of talc, silica and alumina with moderate particle sizes were investigated to obtain a dense cordierite ceramic by boron oxide addition as a sintering aid. Mixed powders were uniaxially ...
Effect of spodumene addition on pyroplastic deformation of porcelain stoneware
(Korean Assoc Crystal Growth, Inc, 2014)
Lithium aluminosilicates, such as spodumene, have been used as raw materials in the production of thermal shock resistant whiteware and sanitaryware. The presence of spodumene causes enhancement of mullitization and imparts ...
Characterization of Ni-W solid solution alloy powders and sintered compacts synthesized via mechanically activated hydrogen reduction of NiO-WO3 mixtures
(2013)
Blended nickel oxide - tungsten oxide powders corresponding to the compositions of 70 wt% nickel - 30 wt% tungsten were mechanically alloyed (MA'd) for different durations such as 0 h, 6 h, 12 h and 24 h and reduced/alloyed ...
Influence of SiC addition on tribological properties of SiAlON
(Elsevier Sci LTD, 2011)
The tribological properties of gas pressure sintered SiAlON and its composite with 18 wt% silicon carbide (SiC) against two different mating materials, i.e., alumina and SiAlON are evaluated. SiAlON and SiAlON-18%SiC ...
Investigation of spacer size effect on architecture and mechanical properties of porous titanium
(Elsevier Science Sa, 2011)
Titanium and its alloy foams have been receiving a growing interest for biomedical industry due to their biocompatibility and high potential in dental, spinal, joint and hip implant applications. Near net shape production ...
SERT HAMMADDE TANE BOYUTUNUN SAĞLIK GEREÇLERİ PORSELENİNİN FİZİKSEL ÖZELLİKLERİNE ETKİSİ
(2011)
üretiminde kullanılan hammaddelerden kuvars kumu ve feldispat sert hammaddelerdir. Sert hammaddelerin tane
boyut dağılımının seramik bünyelerin sinterlenme davranışını ve fiziksel ve mekanik özelliklerini etkilediği
bi ...
The role of viscosity on microstructure development and stain resistance in porcelain stoneware tiles
(Elsevier Sci LTD, 2010)
Effect of composition on viscosity of porcelain stoneware tiles and role of the viscosity on microstructure development and stain resistance in porcelain stoneware tiles were investigated. The viscosity of the tiles was ...
Investigation of parameters affecting grain growth of sintered magnesite refractories
(Elsevier Sci LTD, 2005)
The parameters influencing grain size of sintered magnesite such as temperature (1700 and 1800degreesC), time (19 and 50 min), cooling rate (5, 10 and 25degreesC min(-1)) and various particle size (-3; +3,-5; +5,-8; +8,-10 ...
A comparison of sintering techniques using different particle sized beta-SiAlON powders
(Elsevier Sci LTD, 2012)
In the present study sintering behavior and mechanical properties of beta-SiAlON ceramics were investigated using different sintering techniques (gas pressured sintering (GPS), pressureless sintering and spark plasma ...