Ara
Toplam kayıt 20, listelenen: 1-10
Effect of Kaolin Type on Pyroplastic Deformation of Sanitaryware Porcelain Body
(Gazi University, Fac Engineering Architecture, 2016)
Pyroplastic deformation is one of the major problems of sanitaryware production, because of high temperature firing and high amount of glassy phase and this problem can be reduced by controlling of amount of glassy and ...
Effect of the Particle Size of Hard Raw Materials on Physical Properties of Sanitaryware Porcalain
(Gazi University, Fac Engineering Architecture, 2011)
Sanitaryware porcelain is a kind of a group of glassy porcelains called "vitreous china". The raw materials quartz sand and feldispar used for production of these porcelains are hard materials. It is well known that particle ...
The production of Ni and co-gahnite pigments using ZnO powder produced from metal slags
(Korean Assoc Crystal Growth, Inc, 2010)
In this study, Ni and Co-gahnite pigments were produced from Al2O3 powder and ZnO powder obtained from industrial metal slags. Different pigment compositions were prepared by adding metal oxides (NiO or Co3O4) and mineralisers ...
Effect of kaolin type on pyroplastic deformation of sanitaryware porcelain body [Kaolen türünün saglik gereçleri porselen bünyesinin piroplastik deformasyonu üzerine etkisi]
(Gazi Universitesi Muhendislik-Mimarlik, 2016)
Pyroplastic deformation is one of the major problems of sanitaryware production, because of high temperature firing and high amount of glassy phase and this problem can be reduced by controlling of amount of glassy and ...
The mechanism for the colour change of iron chromium black pigments in glazes through transmission electron microscopy techniques
(Elsevier Sci LTD, 2011)
Black iron chromium (Fe-Cr) bearing oxide pigments are generally utilised as effective colourants in a wide variety of applications. However, in the case of their use within ZnO-containing glazes, they yield an undesirable ...
Production and characterisation of granulated frit to achieve anorthite based glass-ceramic glaze
(Elsevier Sci LTD, 2015)
For the development of matt-transparent glass ceramic coating applied on the porcelain tile, the CaO-Al2O3-SiO2 system was studied. Sinterization and devitrification behavior of granulated frits and viscosity change with ...
Effect of the milling process on the properties of CoFe2O4 pigment
(Elsevier Sci LTD, 2013)
In this study, CoFe2O4 pigments were synthesised using both co-precipitation and conventional ceramic methods. Pigment particles prepared using the conventional ceramic method were subsequently milled to submicron size. ...
SERT HAMMADDE TANE BOYUTUNUN SAĞLIK GEREÇLERİ PORSELENİNİN FİZİKSEL ÖZELLİKLERİNE ETKİSİ
(2011)
üretiminde kullanılan hammaddelerden kuvars kumu ve feldispat sert hammaddelerdir. Sert hammaddelerin tane
boyut dağılımının seramik bünyelerin sinterlenme davranışını ve fiziksel ve mekanik özelliklerini etkilediği
bi ...
Synthesis of Zn2SnO4 powders via hydrothermal method for ceramic targets
(Elsevier Sci LTD, 2015)
The preparation of (SnO2)(x)(ZnO)(1-x) powder as a ceramic target material via hydrothermal synthesis within a broad range of x values (x = 0-1) was investigated. The phase development and particle characteristics of the ...
Production of brown and black pigments by using flotation waste from copper slag
(SAGE Publications LTD, 2006)
One of the major problems in copper-producing Countries is the treatment of the large amount of copper slag or copper flotation waste generated from copper slag which contains significant amounts of heavy metals Such as ...