Ara
Toplam kayıt 269, listelenen: 1-10
Effect of Kaolin Type on Pyroplastic Deformation of Sanitaryware Porcelain Body
(Gazi University, Fac Engineering Architecture, 2016)
Pyroplastic deformation is one of the major problems of sanitaryware production, because of high temperature firing and high amount of glassy phase and this problem can be reduced by controlling of amount of glassy and ...
Effect of the Particle Size of Hard Raw Materials on Physical Properties of Sanitaryware Porcalain
(Gazi University, Fac Engineering Architecture, 2011)
Sanitaryware porcelain is a kind of a group of glassy porcelains called "vitreous china". The raw materials quartz sand and feldispar used for production of these porcelains are hard materials. It is well known that particle ...
The production of Ni and co-gahnite pigments using ZnO powder produced from metal slags
(Korean Assoc Crystal Growth, Inc, 2010)
In this study, Ni and Co-gahnite pigments were produced from Al2O3 powder and ZnO powder obtained from industrial metal slags. Different pigment compositions were prepared by adding metal oxides (NiO or Co3O4) and mineralisers ...
Re-use of mud from process waste water purification plant in ceramic tile production
(Techna Srl, 2010)
Turkey is the fifth biggest ceramic tile exporter of the world. Considering the expectation that the Turkish tile sector continues to expand, further studies both on the improvement and the development of the tile formulations ...
Cost Effective Slurry Preparation in Porcelain Tile Production
(Goller Verlag GMBH, 2009)
During ceramic tile production (wall, floor and porcelain stoneware), wet milling process for the preparation of ceramic slurries is widely used. The currently preferred wet grinding machines are discontinuous and/or ...
Development of ?-ß SiAlON ceramics from different Si 3N4 starting powders
(2009)
?-ß SiAlON ceramics were produced from different starting Si3N4 powders including P-Si3N4 and ?-Si3N4 powders and mixtures of these powders. Gas pressure sintering was used for sintering. After sintering, resultant fracture ...
Utilization of a sandy clay in double-fired wall tile bodies
(Techna Srl, 2010)
In the production of ceramic tiles, composition of body and firing conditions determine the phase transformations and in turn affect the final properties of the product Thus, selection of relevant raw materials and ...
Effect of earth alkaline oxides on firing behaviour of porcelain stoneware
(Techna Srl, 2010)
Aim of this study was to investigate the relations between chemical composition and firing behaviour of porcelain stoneware formulations. The effects of magnesia and/or calcia incorporation in varying amounts into a standard ...
Effect of ZrSiO4 on the corrosion behavior of MgO-FeAl2O4 composite refractory materials
(Carl Hanser Verlag, 2016)
In this study, the corrosion behavior of refractory materials that were produced by incorporating ZrSiO4 (zircon) at different ratios into MgO-FeAl2O4 (hercynite) were investigated. The values of density and open porosity ...
Utilizzo della trachite come fondente nella produzione di piastrelle ceramiche
(2006)
The possible use of trachyte as an alternative fluxing agent in a commercial floor tile body was investigated. The experiments were carried out in two parts: In the first part, standard tests were applied to the products ...