Yayın tarihi için Seramik Mühendisliği listeleme
Toplam kayıt 272, listelenen: 1-20
-
The influence of silicoferrochromium fume on concrete properties
(1995)Silicoferrochromium fume containing 85.5% SiO 2 was investigated to determine whether it could be used as an admixture in concrete to increase its strength. The fume was added at the dosage rates of 0-5 % by weight of ... -
Effect of starting composition, type of rare earth sintering additive and amount of liquid phase on alpha reversible arrow beta sialon transformation
(Elsevier Sci LTD, 1997)Five different alpha-beta sialon and alpha-sialon compositions have been prepared using different rare earth oxide additives namely, neodymium, samarium, dysprosium and ytterbium., Post-sintering heat treatments have been ... -
The effect of heat-treatment on the performance of sub-micron SiCp-reinforced alpha-beta sialon composites .1. Preparation of agglomerate-free starting powders
(Elsevier Sci LTD, 1997)In order to prepare good-quality, dense, SiCp-reinforced alpha-beta sialon composites by hot-pressing, a technique was developed to prevent agglomeration of the SiC grains during powder processing. For this purpose, the ... -
The effect of heat-treatment on the performance of sub-micron SiCp-reinforced alpha-beta sialon composites .3. Mechanical properties
(Elsevier Sci LTD, 1997)Agglomerate-free SiCp-reinforced Ln-sialon (Ln=Nd and Yb) composites were fabricated by hot-pressing and by pressureless sintering to evaluate the improvement in microstructure and mechanical properties that could be ... -
Orientation-dependent equilibrium film thickness at interphase boundaries in ceramic-ceramic composites
(IOP Publishing LTD, 1997)Theoretical considerations of the Hamaker constant for the interaction of two media across a third suggest that the highly anisotropic nature of the refractive indices of a medium such as h-BN will produce an orientation ... -
Microstructural characterization of surface layers formed on a low alloy steel during erosion - oxidation in a fluidized bed
(Chapman Hall LTD, 1997)Low alloy steel specimens were subjected to erosion-oxidation in a simulated fluidized bed environ ment in the range 100-600 degrees C. Transmission electron microscopy was carried out on the surfaces which experienced ... -
Preparation of Ce and Nd beta-sialon ceramics by alpha ->beta sialon transformation
(Inst Materials, 1997)It has previously been accepted that lanthanum and cerium do not form alpha-sialon structures because their ions are too large to enter the interstices in the structure. Recent work on heat treatment of rare earth densified ... -
The effect of heat-treatment on the performance of sub-micron SiCp-reinforced alpha-beta sialon composites .2. Heat-treatment studies
(Elsevier Sci LTD, 1997)The effects of heat-treatment on alpha --> beta sialon transformation in dense, agglomerate-free Ln-sialon/SiCp(Ln=Nd,Yb) composites are reported. The stability of the alpha-sialon phase is not only dependent on the ... -
Interphase boundaries between hexagonal boron nitride and beta silicon nitride in silicon nitride silicon carbide particulate composites
(Elsevier Sci LTD, 1997)Interphase boundaries between hexagonal boron nitride and beta-Si3N4 in hot isostatically pressed Si3N4-SiC particulate composites, in which boron nitride appears as a trace contaminant, have been examined using high ... -
Effect of starting composition, type of rare earth sintering additive and amount of liquid phase on ? ? ß sialon transformation
(1997)Five different ?-ß sialon and ?-sialon compositions have been prepared using different rare earth oxide additives namely, neodymium, samarium, dysprosium and ytterbium. Post-sintering heat treatments have been carried out ... -
The effect of heat-treatment on the performance of submicron SiCp-reinforced ?-ß sialon composites: III. Mechanical properties
(Elsevier BV, 1997)Agglomerate-free SiCp-reinforced Ln-sialon (Ln=Nd and Yb) composites were fabricated by hot-pressing and by pressureless sintering to evaluate the improvement in microstructure and mechanical properties that could be ... -
Interphase boundaries between hexagonal boron nitride and beta silicon nitride in silicon nitride-silicon carbide particulate composites
(1997)Inter phase boundaries between hexagonal boron nitride and Q-Si3N4 in hot isostatically pressed Si3N4-SiC particulate composites, in which boron nitride appears as a trace contaminant, have been examined using high resolution ... -
Optimization and improvement of sialon ceramics with new heat treatment techniques
(1997)Sialons are of interest for use as engineering materials for high temperature (>1000°C) applications becuase they retain good mechanical properties at these temperatures, whereas competing metallic materials are weak and ... -
The driving force for ??ß transformation in rare earth ? sialon ceramics
(1997)In-situ ??ß sialon transformation in rare earth sialon systems, which occurs when dense ?- and ?/ß-sialon samples are heat-treated at temperatures in the range 1300-1600°C was first observed five years ago, and has generated ... -
Thermal stability of rare earth densified ?-sialon ceramics
(1997)Typical ?-sialon and mixed ?-ß sialon starting compositions were densified by either hot pressing or pressureless sintering using the oxides of Yb, Dy, Sm and Nd. The resulting materials were heat-treated at 1450°C for up ... -
Sağlık gereçleri döküm çamurlarının reolojik özelliklerinin incelenmesi ve geliştirilmesi
(Anadolu Üniversitesi, 1997)Döküm ile şekillendirme işleminin başarısı, döküm çamurunun reolojik özelliklerinin belirlenmesi ve kontrolüyle gerçekleşebilir. Reolojik özellikler çamurdaki katı miktarı, çamurun kimyasal ve minerolojik bileşimi, tane ... -
Duvar karosu üretiminde perlit kullanımı
(Anadolu Üniversitesi, 1997)Hızlı tek pişirim yöntemi ile üretilen duvar karosuna ''monoporoz'' denilmektedir. Monoporoz üretimi başlıca hammaddelerin öğütülmesi, granül yapma, presleme, sırlama, kurutma ve pişirme süreçlerini içerir. Perlit %90Ê97 ... -
Cyclic crack growth behaviour of two nickel base turbine disc alloys
(Kluwer Academic Publ, 1998)The high temperature fatigue crack growth behaviour of the nickel base superalloys Alloy 718 and Rene 95 (specimen thickness = 4.1 mm) were investigated and compared with each other. Fatigue crack propagation (FCP) tests ... -
The preparation of Ce alpha-sialons and related unstable phases
(Iom Communications LTD, 1998)It has previously been accepted that lanthanum and cerium do not form alpha-sialon structures because their ions are too large to enter the interstices in the structure. Recent work on heat-treatment of rare-earth densified ... -
An ultrasonic motor using a metal-ceramic composite actuator generating torsional displacement
(Japan J Applied Physics, 1998)An ultrasonic motor composed of three components; a stator, a rotor and a ball bearing is proposed. The stator is made of an active piezoelectric ring, poled in the thickness direction and bonded with two windmill-like ...
